If you discover yourself in requirement of chain link fencing, you’d most likely just head down to the hardware store. However, [The Q] has shown us that you can make your own at house with a easy machine.
The develop starts with a length of pipe, into which spiral slots are cut with an angle grinder. This pipe is the developing tool which shapes the cable into the familiar chain-link design. The pipe is then welded onto a backing plate, as well as fitted with a removable handcrank that turns a flat bar. Feed cable into the spiral groove, turn the crank, as well as out comes cable in the shape required.
From there, developed lengths of cable can be linked up into a fence of any type of preferred size. Of course, fastening each end of the fence is left as an exercise for the reader, as well as the ends are sharp as well as unfinished. However, if you don’t like the chain link fencing on sale at your regional hardware store, or you want to weave your own in some elegant type of wire, this device might be just the thing you need.
We’ve seen similar styles before too, however on much more of a doll-house scale. video after the break.