ZTE Axon 7 is an Android smartphone based on Android 6.0 Marshmallow as well as is upgradable to Android 7.0 Nougat. It was revealed in may of 2016 as well as released in June of 2016. Boasting of a 5.5 inch AMOLED capacitive touchscreen, it has a resolution of 1440 x 2560 pixels (~538 ppi pixel density). Axon 7 is based on MiFavor UI 4.0 as well as is secured by Corning Gorilla Glass 4. It has a Qualcomm MSM8996 Snapdragon 820 chipset, a Quad-core (2×2.15 GHz Kryo & 2×1.6 GHz Kryo) CPU and Adreno 530 GPU. ZTE Axon 7 has an interior memory of 64 GB as well as a 4 GB RAM. It likewise has a hybrid SIM card slot which can likewise be utilized as an SD card slot.
Now, with these specifications, one can expect what a fantastic performance this phone will provide. as well as what will occur when we root ZTE Axon 7, provide SuperSU permissions as well as set up a custom ROM. Yes, the gadget will perform outstandingly well. believing of that, much-inexperienced individuals try to perform these tasks as well as brick their devices by performing the process incorrectly.
Once a gadget is bricked it is typical sense to understand that it won’t boot properly. however with the advancements in advancements of Android tools, bricked gadgets are a thing of past. Unbricking nowadays is easy. acknowledged XDA designer jcadduono have established a technique to unbrick ZTE Axon 7 by flashing the official firmware in EDL mode (Emergency DL mode). Here, we will try to explain this technique in a detailed way.
How To Unbrick ZTE Axon 7
Disclaimer
I have been extremely cautious in explaining the procedure below as well as I hope you comply with it carefully. We, at DroidViews, are not accountable for anything that occurs to your gadget as a result of complying with the procedure incorrectly. If you are okay with this, then go ahead with the tutorial.
Prerequisites
This procedure is only for A2017U (North America) as well as A2017 (China) models. Do not attempt this on A2017G.
Enable OEM Unlocking as well as USB Debugging on your gadget by heading to Settings-> designers Options-> OEM Unlocking. If you are not able to view designers choices in your settings menu, then navigate to Settings-> about phone-> tap “Build number” 7 times as well as designers choice will appear in settings menu.
Make sure your Bootloader is unlocked.
Charge your gadget as much as 60% before starting this procedure.
Install appropriate USB drivers of ZTE Axon 7 on your PC.
Downloads
MiFlash Installer
ZTE Axon 7 full Nougat Firmware B15
Qualcomm QUSB_BULK Drivers
Installation Instructions
Make sure you have unlocked Bootloader on your ZTE Axon 7. If you haven’t, then refer the Unlock Bootloader section of the guide below.
Unlock Bootloader, set up TWRP as well as root ZTE Axon 7
Connect your gadget to PC.
Next, download the Qualcomm QUSB_BULK drivers from the “Downloads” section as well as extract it in a folder. name the folder as “Qualcomm QUSB_BULK Drivers”.
In the “Qualcomm QUSB_BULK Drivers” folder, right click on qcser.inf as well as click on Install.
After the drivers are installed, your gadget will be acknowledged as a COM port known as “Qualcomm HS-USB QDLoader 9008”. This specifies that your gadget is linked to PC.
Next, download MiFlash Installer from the “Downloads” section as well as set it up on your PC.
Open MiFlash Installer as well as choose the ZTE Axon 7 full Nougat Firmware B15 which you downloaded above.
Boot your ZTE Axon 7 in EDL mode by pressing volume Up+Volume Down+Power button together up until you are stuck on a black screen.
Flash the firmware by clicking “Flash”.
That’s it! After the flash is completed, you will be effectively able to recuperate from the brick as well as utilize your ZTE Axon 7 normally. For any type of queries, decrease down a comment below.